This is the solution for adjust mesh band.
STEP1. Open the outermost double buckle.
STEP2. Release retaining clip
Open the lip holding the band under the bukle upwards.
STEP3. Move the bukle position
There is a groove on the inside of the band for adjustment.
Adjust the length by moving the buckle to fit the groove.
STEP4. Close the fixing clip
Close the fixing clip opened in STEP 2.
If the fixing clip does not close, refer to STEP 3.
Fit the buckle into the groove inside the band.
TIP. Correct position for the line to in
If the buckle comes off the band during adjustment,
you must insert the band between the bottom of the buckle and the middle metal plate.